Clicky

MSDS

Data included in this Safety Data Sheet: (MSDS Francais)

According to EC directive 1907/2006/EC Article 31

  1. Material / preparation and company designation
  2. Possible hazards
  3. List / data of components
  4. First aid measures
  5. Measures in case of fire
  6. Accidental release procedures
  7. Handling and storage
  8. Engineering controls
  9. Physical and chemical data
  10. Stability and reactivity data
  11. Toxicological properties
  12. Ecological properties
  13. Disposal conditions
  14. Transport information
  15. Regulations
  16. Other information

1. Material / preparation and company designation

Company:         Canmec Enterprises

PO BOX 30088

Vancouver, British Columbia

V6P 5A0 Canada

1.866-824-8947

Date Printed:  26/06/2017

Date Revised:  26/06/2017

Supersedes: 11/07/2016

Usage:  Adhesive

______________________________________________________________

2. Possible hazards

This material may cause slight inhalation and eye irritation.  May be an ingestion irritant.  Prolonged or repeated contact may cause skin irritation.   Workers exposed to latex gloves and other products containing natural rubber latex may develop allergic reactions such as (rashes, hives, nasal, eye/sinus symptoms, asthma and (rarely) shock). This product is not for human consumption; use proper precautions.

______________________________________________________________

3. List / data of components

Information on hazardous ingredients:  Ethylene Glycol, CAS# 107-21-1

Refer to Section 15:  Regulations

Chemical name:  Speed-Sew                                       %w/w

Product code:  Speed-Sew                                          Hazard symbol: N/A

CAS-no.  N/A                                                               H-phrases:  N/A

EC-no.:  N/A                                                                P-phrases:  P273

Formula:  Natural Latex  95%

Water/Additives   5%

See section 16 for the full text of the Hazard symbols and Phrases.

______________________________________________________________

4. First aid measures

Inhalation:  Remove to fresh air immediately and consult medical attention from a licensed healthcare professional.

Skin contact: Wash affected area immediately in flowing water (warm if readily available) for at least 15 minutes (carefully remove contaminated or protective clothing while washing) and consult medical attention from a licensed healthcare professional.   Wash clothing before reuse.  Destroy items that cannot be decontaminated, including leather articles such as shoes, belts and watchbands.

Eye contact:  Flush eyes immediately with plenty of water for 15 minutes including under upper and lower eyelids. Washing eyes within one minute is essential to achieve maximum effectiveness.  Remove contact lenses after the first 5 minutes.  Obtain medical attention from a licensed healthcare professional as soon as possible.

Ingestion:  Latex will coagulate in digestive tract.  Seek medical attention from a licensed healthcare professional. Never give anything by mouth if victim is unconscious or having convulsions.  Do not induce vomiting unless directed to do so by medical personnel.

______________________________________________________________

5. Measures in case of fire

Suitable extinguishing media: Foam, CO2, Dry Chemical, Water Fog.

Hazardous decomposition/combustion products:   Thermal decomposition should produce only normal hydrocarbon combustion products.  Products of thermal decomposition may be harmful.

Special protective equipment for fire fighters:   Care should be taken to avoid exposure to liquid product in fire.  Firefighters should wear NIOSH-approved self-contained breathing apparatus with full face piece, operated in positive pressure mode.  Wear full firefighting protective clothing.  Use water fog to cool containers exposed to extreme heat.

Other information: If ignited by excessive heat or open flame, this product will burn.  Burning material may emit toxic fumes. Potentially hazardous vapors could accumulate above the liquid in closed containers and bulk storage vessels. Closed containers may rupture/burst when exposed to extreme heat. Care should be taken to avoid exposing the vessel to heat or open flames. Vent and aerate such vessels before entering for maintenance or cleaning.

______________________________________________________________

6. Accidental release procedures

personal precautions:  Use protective equipment.  NIOSH-approved Self-contained breathing apparatus must be available in case of emergency. Use caution to avoid falls.

environmental precautions:  Dike and contain spill for possible recovery and to prevent from entering waterways. Eliminate sources of ignition from the spill area.

methods for cleaning up / taking up:  Recover as much as possible; wash floors afterwards with water.  Smaller spills may be wiped from surfaces or absorbed onto inert material and handled as solid waste.  Place discarded material in closed, labeled containers for disposal.  Do not allow material into sewers, on the ground or into any body of water.  Measurement of certain physical properties and analysis for regulated components may be necessary to make a determination for product meeting the criteria of a hazardous waste.  Must be disposed of in accordance with all local, state, federal and international regulations

.______________________________________________________________

7. Handling and storage

Adhere to work practice rules established by government regulations (e.g. OSHA).

Advice on protection against fire and explosion:  Closed containers may rupture/burst when exposed to extreme heat. Care should be taken to avoid exposing the vessel to heat or open flames. Vent and aerate such vessels before entering for maintenance or cleaning.

Storage requirements:  Use reasonable care to avoid skin and eye contact. Do not eat, drink or smoke in working area. Food, beverages, and tobacco products should not be carried, stored, or consumed where this material is in use. Avoid breathing vapors.  Keep containers closed when not in use.  Protect containers against physical damage.  Store in a cool, dry, well-ventilated area.  If needed, stir before using.  Vent and aerate vessels before entering for maintenance or cleaning.  ‘Empty’ containers retain product residue (liquid and/or vapor) and should be handled with caution.   Any use of this product in a process should be evaluated to establish and maintain safe operating procedures.

______________________________________________________________

8. Engineering controls

Exposure limits:  No information available.  Consult local authorities for acceptable exposure limits.

Respiratory protection:  None necessary under normal conditions (adequate ventilation).  If necessary, use NIOSH- approved respiratory protection. Recommended Local exhaust.  Exhaust systems should be designed to move the air away from the source of vapor/aerosol generation and people working at this point. Ventilation must be adequate to maintain contaminant concentration below permissible exposure limits.  Ventilation should be in accordance with OSHA regulations.  Properly maintain and have readily available an eyewash/safety shower facility in the work area.

Hand protection:  Use gloves impervious to this material.  The breakthrough time of the selected glove(s) must be greater than the intended use period.  NOTICE:  The selection of a specific glove for a particular application and duration of use in a workplace should also take into account all relevant workplace factors such as, but not limited to:  Other chemicals which may be handled, physical requirements (cut/puncture protection, dexterity, thermal protection), potential body reactions to glove materials, as well as the instructions/specifications provide by the glove supplier.  Before eating, drinking, smoking or using the toilet, wash face and hands thoroughly with soap and water.

Eye protection:  Recommend the use of safety eyewear including splashguards or side shields.  If splashing is likely, wear a face shield.

Skin and body:  Gloves, Apron or protective coveralls may be needed to help prevent soiling of skin and clothing. Wear proper safety boots.  Contaminated clothing and shoes should be cleaned before reuse or disposed of as necessary.  It is recommended that a shower be taken after completion of work shift, especially if significant contact has occurred.  Street clothing should be stored separately from work clothing and protective equipment. Work clothing and shoes should not be taken home.

______________________________________________________________

 9. Physical and chemical data

Form:    Liquid

Color: White

Odor:  Ammonia

Boiling point/range:  > 93oC (200F)

Melting point/range: 0C (32F)

Flash point: No information available

Flammability:   Non-flammable in aqueous form.

Auto ignition temperatures: No information available.

Explosion limits:  No information available.

Vapor pressure: 760mm Hg @ 100C (212F)

Density:  940 kg/m3  (typical)

Solubility in water:  Miscible

Solubility in other solvents: No information available.

pH: 10.0 – 11.0

Partition coefficient (Coefficient of Therm. Expansion): No information available.

n-octanol/water: No information available.

______________________________________________________________

10. Stability and reactivity data

Conditions to avoid:  Stable.  Avoid freezing, heat, sparks, open flames.  Hazardous polymerization will not occur.

Materials to avoid:  Copper, Zinc and their alloys.  Solvents, acids, metal salts and other compounds which may coagulate latex.

Hazardous decomposition products:  Thermal decomposition should produce only normal hydrocarbon combustion products.  Products of thermal decomposition may be harmful.

______________________________________________________________

11. Toxicological properties

Acute toxicity data:

Oral LD50:  Small, single dose – oral toxicity is believed to be low; swallowing amounts larger than that may cause injury.

Dermal LD50: No information available.

Inhalation LC50:  No information available.

Irritation

Skin:  Slight

Eye:  Slight

Sensitization:  No information available.

Genotoxicity: Ethylene Glycol has been shown to produce teratogenic effects in rats.

Other toxicological information: At room temperature, vapors are minimal due to low volatility. However, certain operations, especially those that involve higher temperatures, may generate vapor or mist concentrations sufficient to cause irritation and other adverse effects.

______________________________________________________________

12. Ecological properties

Ecotoxic effects:

Fish:  No information available.

Daphnia:  No information available.

Algae:    96h-EC50 (Cell count): No information available.

______________________________________________________________

13. Disposal conditions

product:  Do not allow material into sewers, on the ground or into any body of water. Measurement of certain physical properties and analysis for regulated components may be necessary to make a determination for product meeting the criteria of a hazardous waste. Empty’ containers retain product residue (liquid and/or vapor) and should be handled with caution.  Must be disposed of in accordance with all local, state, federal and international regulations.

Contaminated packaging: No information available.

Waste code number:  Please refer to your specific industry in the EUROPEAN WASTE CATALOGUE.

______________________________________________________________

14. Transport information

Shipping descriptions may vary based on mode of transport, quantities, package size, and/or origin and destination. Consult your company’s Hazardous Materials/Dangerous Goods expert for information specific to your situation.

Land transport ADR/RID and GGVS/GGVE and TDG

ADR class:                                                ADR/RID packing group:

RID class:                                                 Substance identification no.:

Hazard identification:                                UN no.:  Not regulated

Proper shipping name:

Marine transport IMDG / GGV See

IMDG-code class:                                      Packing group

EMS:                                                          UN-no.: Not regulated

Marine pollutant:                                        subsidiary risk:

Proper shipping name:

Air transport ICAO-TI und IATA-DGR

class:                                                          UN-no.: Not regulated

Packing group

Proper shipping name:

______________________________________________________________

15. Regulations

This section is not meant to be all-inclusive; selected regulations are represented.

SARA 313 SECTION OF TITLE III OF THE SUPERFUND AMENDMENTS AND REAUTHORIZATION ACT OF 1986 AND 40 CFR PART 372:

This product contains the following substance(s) subject to the reporting requirements of Section 313 of Title III of the Superfund Amendments and Reauthorization Act of 1986 and 40 CFR Part 372:

Ethylene Glycol      CAS# 107-21-1               <3%

COMPREHENSIVE ENVIRONMENTAL RESPONSE, COMPENSATION AND LIABILITY ACT OF 1980 (CERCLA, OR SUPERFUND):

This product contains the following substance(s) listed as “Hazardous Substances” which may be subject to CERCLA Section 103 reporting requirements and which are listed in 40 CFR 302.4:

Ethylene Glycol             CAS# 107-21-1               <3%

OSHA HAZARD COMMUNICATION STANDARD:

This product contains a small component that is a “Hazardous Chemical” as defined under the criteria of the Federal OSHA Hazard Communication Standard, 29 CFR 1910.1200.

WHMIS INFORMATION:

The Canadian Workplace Hazardous Materials Information System (WHMIS) Classification for this product is:  D2A

CHEMICAL INVENTORY:

United States-All components of this product are on the Toxic Substance Control Act TSCA) inventory or are exempt from TSCA Inventory requirements under 40 CFR 720.30.

Canada-All components of this product are on the Canadian Domestic Substances List (DSL) or are exempt from listing.

Labelling in accordance with EC directives / German regulations

Labelling

EC-no.:  N/A

Symbols: N/A R-

phrases: N/A

S(safety) phrases: S61

Water hazardous class (Germany) (WGK): N/A

See section 16 for the full text of the Hazard symbols and Phrases.

______________________________________________________________

16. Other information:

Hazardous Material Identification System (HMIS) rating/codes:

Health – 2     Flammability – 1      Reactivity – 0     Protective Equipment – B (safety eyewear, gloves)

HMIS uses a numbering scale ranging from 0 – 4 to indicate the degree of hazard.

Values:  0 = Minimal       1 = Slight           2 = Moderate      3 = Serious        4 = Extreme

An asterisk (*) indicates chronic health hazards are associated with the chemical. The proper protective equipment is identified with a letter corresponding to equipment listed after in parentheses.

Legend:

P273 – Avoid release to the environment.

S61 – Do not release product to the environment.

Do not handle until the Manufacture’s Safety Precautions have been read and understood. The safety data sheet is only intended to give a description of products with regard to safety requirements. The information contained herein is based on data considered accurate.  However, it is not to be taken as a warranty or representation for which Textile Rubber & Chemical Co. or Textile Rubber & Chemical Co. (Canada) assumes legal responsibility.  Any use of this information and data must be determined by the user to be in accordance with applicable international, federal, state and local laws and regulations.

Recent Posts